Zooz 700 Series Z-Wave Plus Double Relay ZEN52

Two devices, one compact relay! This 120V device allows you to add Z-Wave control to 2 different loads; automate two light switches in a dual gang box with one device, or separate control of your fan’s motor and light that are currently controlled by one switch. No neutral at the box? No problem; simply install the ZEN52 at the fixture. The 700 series chip, SmartStart function, included pigtail wires, and up to date S2 security make installation and inclusion fast and easy.

HIGHLIGHTS

• 2-in-1 Z-Wave device: connect the ZEN52 Double Relay to two 120V loads for independent control from your Z-Wave hub or wall switch
• Fan/light combo installations: provides individual control of the motor and the bulbs
• Compact size: Wire behind the wall switches or at the fixture (neutral required)
• 700 series Z-Wave: updated technology ensures extended range and faster communication
• SmartStart with S2 authenticated security for a simple, secure inclusion
• Pigtail wires for fast and easy installation
• Smart bulb mode: allows you to disable manual and/or Z-Wave control to ensure power is never cut from your smart bulbs
• Scene control: up to 7 multi-tap triggers are available for each relay; customize your connected devices! (available on hubs that support multi-tap triggers)
• Multicolor LED indicator: guides you through inclusion and can troubleshoot range and connectivity issues at the relay
• Compatible with quality LED and incandescent bulbs (don’t connect to ballast tube lights, switched receptacles, or fans over 1/4 hp; NOTE: FEIT bulbs are not recommended)
• Z-Wave extender: 700 series repeater for better range and a stronger signal
• 5-year warranty and lifetime tech support

SPECS

• Z-Wave™ Frequency: 908.42 MHz (US)
• Power: 120-240 VAC, 50/60 Hz
• Maximum Loads: 500W incandescent, 150W LED bulbs, 5A resistive, 1/4 HP fan motors per channel
• Z-Wave Range: Up to 300 feet line of sight
• Dimensions: 1.5″ tall, 1.4″ wide, 0.7″ deep
• Operating Temperature: 32-104° F (0-40° C)
• Installation: Indoor use only