Zooz Z-Wave Plus 700 Series Titan Water Valve Actuator ZAC36

Enjoy peace of mind when you leave home, knowing the Titan will shut off even the most stubborn valve and save you money in preventing water damage. Install the Titan in less than one minute without any tools, and even operate the device without inclusion to the hub as a stand-alone offline flood prevention system with the provided wired leak-detector. When the ZAC36 is included in your hub, you can automate your water valve shut off, monitor leaks anywhere in the home utilizing Z-Wave™ water sensors, and even receive notifications on your phone.

HIGHLIGHTS

• Automatic shut-off: the Titan Valve Actuator will automatically close your water valve whenever a leak is detected on any of the remotely connected water leak sensors when included to your Z-Wave hub
• Works offline: use the ZAC36 for stand-alone leak prevention! The wired leak sensor probe is included, which will trigger the Titan to shut your water off even if the hub is offline or if you don’t have a Z-Wave controller at all!
• Indoor / outdoor: enjoy the freedom to install the actuator either indoors or outdoors, wherever your water main is located
• Tool-free DIY installation: Fast, simple, installation with no tools required! Please install and calibrate the valve before testing it
• Remarkably powerful: the Titan actuator auto-calibrates and can handle even the most stubborn valves
• New 700 series Z-Wave chip: faster, more secure, and reliable wireless communication with greater range than ever
• 0.5″ – 1.25″ ball valves only. Ensure you have 3″ clearance to each side from the center of the valve, 1″ clearance between the pipe and the wall, and at least 1.25″ clearance between the valve handle and the pipe.
• SmartStart for easier and safer pairing
• 5-year warranty and lifetime tech support

SPECS

• Valve Requirements: 0.5″ – 1.25″ ball valves only
• Installation Requirements: 3″ clearance from the valve center to each side on the pipe, at least 1.25″ clearance between the valve handle and the pipe, at least 1″ clearance between the pipe and the wall.
• Z-Wave Frequency: 908.42 MHz (US)
• Z-Wave Chip: 700 series
• Power: 12 V DC (1 A) power supply (included)
• Power Cord Length: 9.5 feet
• Temperature Sensor Range: -40° – 257° F
• Sound Indicator: up to 85 dB
• Wireless Range: Up to 400 feet line of sight (up to 130 feet indoors)
• Operating Temperature: 14° – 122° F
• Dimensions: 5.5″ long x 2.25″ wide x 5″ tall
• Installation: Indoor or outdoor use (IP66)