Zooz 700 Series Z-Wave Plus Scene Controller ZEN32

Introducing the first 700 series Z-Wave™ wall mounted scene controller with a 3-way switch. Connect a 120 V light to it or use this device for remote control only. With multi-tap trigger support and direct association options, you can program up to 40 triggers for simple and intuitive control of your favorite scenes and devices.

HIGHLIGHTS

• Main button: on/off control for 120 V lights or fans under 3 A, works as a remote control button too!
• 4 smart buttons: wireless control of your connected devices
• 700 chip: more range and quicker action
• SmartStart: easy inclusion and S2 authenticated security for a safe network
• Direct 3-Way Solution: no add-on switch needed, wires just like the ZEN71 model
• Programmable LED indicators: 4 colors and 3 brightness levels available
• Range test tool: diagnose signal issues straight from the device
• Scene control: activate up to 35 scenes, control up to 40 devices if you add direct association triggers!
• Smart bulb mode: disable the relay for truly wireless control or use as a remote control / smart add-on switch
• Compatible with quality LED and incandescent bulbs (don’t connect to ballast tube lights, switched receptacles, or fans over 3A / 5 years old)
• Use a standard-size wall plate for single gang installations (wall plate not included)
• 5-year warranty

SPECS

• Z-Wave Frequency: 908.42 MHz (US)
• Power: 120 VAC, 60 Hz
• Maximum Loads: 960W Incandescent, 150W LED bulbs, 1800W (15A) Resistive, 3A fan motors
• Z-Wave Range: Up to 500 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module
• Dimensions: 1.16″ deep, 1.75″ wide, 4.1″ tall
• Operating Temperature: 32-104° F (0-40° C)
• Installation: Indoor use only